SOOO Confused
Have yet to decide whether to go with the Brake Buddy "Patroit" system or the "Ready Brake" system! The local RV center swears by the patroit system and says the readybrake will create problemd with t...
Forum Discussion
Wow, that's quite a description, and make a lot of sense...
I think I'll put my money into some other braking system!
Thank you
--------------------------------------------------------------the type of system that Ready Brake uses is subject to Hysteresis. So, if you step on the brake (especially if you hit the RV brakes hard), the toad pushes forward into the back of the RV. This movement is mechanically transferred to the toad brake through a lever and a cable. Then the cable pulls on the toad brake pedal as though a driver had stomped on the pedal. The toad would then pull backwards from the RV releasing the pressure on the lever and cable, and letting up on the brake. Then the toad (not braking any longer - but the RV is still braking) overtakes the back of the RV and which causes the lever to pull the cable connected to the toad brake pedal and the toad slams on the brakes and the whole cycle starts over again. The remedy for this herky jerky braking, is to use something like a shock absorber to stifle the repetitive action of the lever pulling on the brake cable.
I think I'll put my money into some other braking system!
Thank you
--------------------------------------------------------------the type of system that Ready Brake uses is subject to Hysteresis. So, if you step on the brake (especially if you hit the RV brakes hard), the toad pushes forward into the back of the RV. This movement is mechanically transferred to the toad brake through a lever and a cable. Then the cable pulls on the toad brake pedal as though a driver had stomped on the pedal. The toad would then pull backwards from the RV releasing the pressure on the lever and cable, and letting up on the brake. Then the toad (not braking any longer - but the RV is still braking) overtakes the back of the RV and which causes the lever to pull the cable connected to the toad brake pedal and the toad slams on the brakes and the whole cycle starts over again. The remedy for this herky jerky braking, is to use something like a shock absorber to stifle the repetitive action of the lever pulling on the brake cable.
