Source for toad battery charge...?
I am currently setting up my toad for towing and I want to put a battery charge maintainer in circuit. I know which pin on the 6-way connector carries the +V, but it does not currently have voltage. ...
Forum Discussion
I have not yet looked at the back of the connector. When I first acquired the RV I checked every fuse and circuit breaker. Until you first look you would not believe how many fuses and circuit breakers this puppy has. Since I found no problems I am going on the initial hypothesis that there is no wiring at this time.
The toad has aftermarket lights for turn signals that are powered by the RV.
I have a Brake Buddy system that will activate the brake pedal which then uses the toad power for the brake lights. I have wired up the breakaway switch, and wired a second cigarette lighter socket to power the Brake Buddy.
I will study the electrical schematics and see if that sheds any light on the situation before I crawl under the RV.
Thanx for the suggestions.
God us love, but get it in writing. Gypsy Rose Lee
The toad has aftermarket lights for turn signals that are powered by the RV.
I have a Brake Buddy system that will activate the brake pedal which then uses the toad power for the brake lights. I have wired up the breakaway switch, and wired a second cigarette lighter socket to power the Brake Buddy.
I will study the electrical schematics and see if that sheds any light on the situation before I crawl under the RV.
Thanx for the suggestions.
God us love, but get it in writing. Gypsy Rose Lee
