Source for toad battery charge...?
I am currently setting up my toad for towing and I want to put a battery charge maintainer in circuit. I know which pin on the 6-way connector carries the +V, but it does not currently have voltage. ...
Forum Discussion
You may want to contact Winnebago they should know if it was built with a hot wire going to the connector. If you do have the Winnebago serial number handy not the VIN #. At the web site you can also do a second owner registration link under Resources link. I have used the e-mail address with questions and have gotten good replies. Dick
Service Administration
Winnebago Industries, Inc.
Phone: 800/537-1885
Fax: 641/585-6981
or @ winnebagoind.com - contacts there is an e-mail link
To get 12v to the connector pin, I think your ing. need to be in the on position.
Service Administration
Winnebago Industries, Inc.
Phone: 800/537-1885
Fax: 641/585-6981
or @ winnebagoind.com - contacts there is an e-mail link
To get 12v to the connector pin, I think your ing. need to be in the on position.
