Super Glide Dimensions Ram 3500
I tried asking and finding accurate dimensions on a new Super Glide ISR in a 2015 Ram Dually. Well I a was never able to come up with much and the manufacturers were not much help. So I had to order b...
Forum Discussion
OK, so with the fifth wheel prep package on my 2015 Ram 3500, I have been told that I have two options with the 16K Superglide (email from PullRite themselves). The four digit numbers are the PullRite part numbers:
Option 1: 4100 + 4439 + 4409 + Capture Plate - Height of 15"
Option 2: 2700 + 4439 + Capture Plate - Height of 18.5"
Option 2 should be cheaper with one less component, but option 1 rides lower. Do both of these options work with the prep package, or does one of them require drilling? Which is the best setup to go with? I like the idea oof less components (and likely lower cost) of Option 2, but will it ride too high? Which model Superglide are you guys using?
Thanks.
Option 1: 4100 + 4439 + 4409 + Capture Plate - Height of 15"
Option 2: 2700 + 4439 + Capture Plate - Height of 18.5"
Option 2 should be cheaper with one less component, but option 1 rides lower. Do both of these options work with the prep package, or does one of them require drilling? Which is the best setup to go with? I like the idea oof less components (and likely lower cost) of Option 2, but will it ride too high? Which model Superglide are you guys using?
Thanks.
