Tekonsha P3
Anyone know how much power a Tekonsha P3? The set-up in my truck is always powered up (even with key off)and I would like to put a switch. Would the controller keep settings with no power
Forum Discussion
Unplug my P3, stuff it into the carry case and put it into the toolbox or store it in the garage electronics/testers/etc toolbox
ETrailer Q/A, How To Turn Off The Tekonsha Prodigy P3 Brake Controller # 90195
ETrailer Q/A, How To Turn Off The Tekonsha Prodigy P3 Brake Controller # 90195
etrailer.com wrote:
Question:
I have the P3 brake unit. I dont pull very often, how do I turn it off other then unplugging.
asked by: Brian
Expert Reply:
The Tekonsha Prodigy P3 Brake Controller, # 90195, does not have an on and off switch.
It will go into sleep mode after several minutes of no activity.
The power draw when it is in the sleep mode is so negligible that it will not discharge the battery.
If you want the brake controller totally off, then you would have to unplug the connector from the back of the controller.
expert reply by: Jeff D
