Toad lights - wire length - Problem solved
I have a 2006 HHR toad. I Previously used magnetic lights but purchased a Hopkins adapter to use the HHR lights. Adapter came with about 20 ft of wire with 4 prong plug. I had run wiring front to ba...
Forum Discussion
I would suggest connecting the ground in the front of the HHR to factory ground, then attach ground in the rear of the HHR to the HHR factory ground. This should reduce the resistance of the system and lower the voltage drop.
look at item 11 in the installation instructions.
look at item 11 in the installation instructions.
