Toad lights and Diodes
I'm stuck in Tyler, TX with non-working toad lights. I drug the rear end of the MH and crushed the light cable going to the toad connector. I've replaced the cable and have signal all the way back t...
Forum Discussion
jswat wrote:
I'm stuck in Tyler, TX with non-working toad lights. I drug the rear end of the MH and crushed the light cable going to the toad connector. I've replaced the cable and have signal all the way back to the diodes in the rear of my toad. My question, can diodes fail ? When my cable was crushed, all the wires were exposed and in contact with one another. Would this cause a short that would kill my diodes. Thanks for any help.
you betcha they can fail. lose the diodes and you lose your lights full time. had them fail twice in our '03 wrangler. never want to go thru that again so we had a second wiring harness and a second set of bulbs installed. when hooked to the MH the umbilical connects the second set of bulbs via the aux wire harness.
