Torque Multiplier Lug Wrench
Anyone ever use (or see) one of these? I just stumbled across it on the internet. I've never seen or used one. EZ Lug Wrench Torque Multiplier: http://ezlugwrench.com/
Forum Discussion
When I first bought the MH I had a hard time removing the lug nuts. After twisting several extensions(Chinese) I found some old Stanley extensions that were hardened and with a breaker bar and a steel pipe extension I was able to remove the lug nuts. So know I carry a 1/2 in breaker bar 2 ft long with a 2 ft pipe the I keep on the bar and a 4 in extension to clear the rim. It will be a lot cheaper than spending $150 for a torque multiplier. Once you remove the lug nuts and apply the proper torque you won't have to go through this again.
