Torque Wrench for WD Hitch nylock nuts
Is this the right thread for this, first of all? I'm trying to install a weight distribution hitch to haul my trailer of stuff from east county San Diego California to Kansas. It's a 7' x 14' cargo...
Forum Discussion
Think mixing up 3/4" bolt (measured at the shank dia) vs across the hex flats
A 3/4" across the hex flats is a 1/2" bolt...which IIRC, tops out around 160 ft/lbs max torque for a grade 8
A 3/4" bolt (measured at the shank), IIRC, tops out around 380 ft/lbs
Socket sets are sized by the measurement across the square flats
A 3/4" across the hex flats is a 1/2" bolt...which IIRC, tops out around 160 ft/lbs max torque for a grade 8
A 3/4" bolt (measured at the shank), IIRC, tops out around 380 ft/lbs
Socket sets are sized by the measurement across the square flats
