Tow Wire Gremlins
I have a problem with my 2014 Honda CRV towing lights. Please bear with the long winded explanation (if it was simple I wouldn’t need help). Background: 99 Itasca, towing 1) 2000 Wrangler, 2) 201...
Forum Discussion
The CRV has separate amber turn signals.
The RV has two red lights on each side in the back (pic below). I don’t remember if the stop and turn are separate, or if one is for running lights and the other is both stop and turn. In the pic, the lower light is “on”, which was a turn signal.
The tow plug at the RV bumper is round 6 pin (5 pins are “mapped” with a wire). I’m assuming 1 ground, 3 for STT, and 1 for an optional brake controller (which I don’t have). The other end of the umbilical is round 4 pin which connects to the 4 flat magnet light connector (Jeep) or the TrailerMate 4 round wire harness connector (CRV).
Thanks for the suggestions. I just put the RV away in storage, will go back to storage lot and confirm the stop/brake lights on the RV.
The RV has two red lights on each side in the back (pic below). I don’t remember if the stop and turn are separate, or if one is for running lights and the other is both stop and turn. In the pic, the lower light is “on”, which was a turn signal.
The tow plug at the RV bumper is round 6 pin (5 pins are “mapped” with a wire). I’m assuming 1 ground, 3 for STT, and 1 for an optional brake controller (which I don’t have). The other end of the umbilical is round 4 pin which connects to the 4 flat magnet light connector (Jeep) or the TrailerMate 4 round wire harness connector (CRV).
Thanks for the suggestions. I just put the RV away in storage, will go back to storage lot and confirm the stop/brake lights on the RV.
