Tow/haul mode
What to do? I was on a steep grade and tapped my brake and it downshifted from 3 to 2 and hit 6000 rpm. I still wanted to slow down more but could not hit the brake again as I was high on rpm already ...
Forum Discussion
Michelle.S wrote:
If the TV is anything newer the computer should protect the motor from you. So no it shouldn't down shift again unless you have a 10K redline.
Ditto.
Since the downshift to 2nd resulted in a relatively high RPM, hitting the brakes again isn't going to cause it to downshift again, until the RPMs are much lower than they currently were when the trans shifted to 2nd
