carringb wrote:
Sound like you need more damping (aka better shocks) on the rear of the truck.
When you did the lift, I assume longer shocks were installed? The base shock on most lift kits is tuned for a softer ride, and the base shock usually is just an OEM-grade twin-tube shock. You'll see a huge improvement with a mono-tube shock, especially one spec'd for your heavier load.
Yes, they are Fox 2.0 Performance Monotube shocks.
Not clear what their load rating is. I'll see if I can find out.
The back is raised with a 2" block between the axle and the leaf springs though. Leaf springs were left alone for the lift (other than the lift block).