BenK wrote:
Ditto...fix it or replace
Connectors of this type are designed to mate repeatedly
First check out if there is something 'in' there, or worn bit of plastic
If me, I'd replace as DE and others recommends. If you are not handy
in this area, then any trailer/UHaul/etc can also do the replacement
On this type of thing, I'd not spare pennies and get the better one.
They all have have the same form factor, as that is an industry standard
X6 or whatever, Clean inspect Repair correctly or replace bad parts, Bungee cords and Velcro have their place, they should not be needed to hold the connector in place.