Transporting Motor for PortaBote
Good morning. Hubby got on the other day looking at suggestions for transporting our PortaBote but didn't want to attach to TT side. We actually got it into the TT this weekend with no problems whatso...
Forum Discussion
CarpFishermanAndWife wrote:JEBar wrote:
back near the front of the TT, we welded an arch between the two sides of the tongue and hung our Port-A-Bote's motor in the same way it hangs on the back of the boat
Jim
Do you have a pic Jim?
Shari
sorry, I don't and even if we did, I am not able to post pictures on this forum .... that was back in late '02 and I didn't have a digital camera back then .... basically the uprights were 1.5" thick wall box tubing that were welded to the inside of the camper's A-frame tongue .... it was right located beside the battery box .... the cross was a section of treated 2X6" that was bolted to the uprights .... the motor clamped to the treated board just like you attach it to the back of the boat
Jim
