willi4nd wrote:
Pro series WD and a Curt sway bar.
My dealer showed me how to set up the WD bars, basically to adjust so TV and TT are level and to make sure the distance is the same on front and rear tires of the truck.
Don't think your dealer knew much of what he was doing. The front should be back to the distance it was unhooked, Or REAL close to it. Looking at your pic. Your TV is sitting too low in the rear, and too high in the front.
Also. A too tight sway control bar can cause the TV to pull to one side. But usually it changes side depending on your last turn.