Forum Discussion
time2roll
Jan 08, 2020Nomad
what RPM are you running during the climb and overheat?
I would aim for about 200 to 1000 rpm over peak torque rpm rating. Pull the lever and hold the gear. Adjust your speed to get the RPM in the zone and just set the cruise.
AFAIK you should get lockup in all gears except 1st when using this method.
I would aim for about 200 to 1000 rpm over peak torque rpm rating. Pull the lever and hold the gear. Adjust your speed to get the RPM in the zone and just set the cruise.
AFAIK you should get lockup in all gears except 1st when using this method.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,178 PostsLatest Activity: Dec 20, 2025