VIN replacement tag on utility trailer

To the OP, unless you are required to get a vin inspection and that is holding it up, IMO, who cares as long as they give you your title and tags?

Sam Spade wrote:

mowermech wrote:

All problems solved with two trips to the County Courthouse!

Which might end up being two trips TOO MANY.
Call first. The State DMV or local Sheriffs office.

Note that I specified "here in Montana". I don't need to call, because I have done it. Several times, in fact.
Of course, if YOU do not know how it all works in YOUR state, you definitely should call somebody who does know. But, ask the question of somebody who knows, like the office where you do title transfers. It is unlikely any law enforcement officer will know, unless you are lucky enough to find one of the few who have "been there, done that".
Many times, when I call to have a VIN inspection done, I have had to guide the LEO through the process, because he had never done it before. I even had to show one of them where to sign the form!

If I remember correctly, when I bought my cargo trailer directly from the manufacturer in Douglas, GA, there was no "Title". I asked them about it and they told me they don't give a Title, but instead issue me a "Bill of Sale" with the VIN, cost info, size, etc.

I took that to NJ MV to register the trailer and they were not one bit bothered that I only had a "Bill of Sale". I think as long as they got their sales tax that I had to pay at registration that was all that mattered.

mike-s wrote:

bob_nestor wrote:
The "IC9" portion is typed.

Look at something you didn't bother to provide a link to? No, I didn't. Many typewriters didn't have a separate glyph for the numeral "1", it was common to use a lower case "l" or, less commonly, an uppercase "I" in its stead. It may be expecting a bit much, but when the character is meant to be a one, a scanning result of ell or eye is a mis-scan.

In any case, the fact remains, no WMIs start with the letter I, and many trailer manufacturers do have WCIs which do start with 1C9, which falls in the range for USA WMIs. (NHTSA, ibid)

Oh good grief! First off, not all PDF files are scanned files, an assumption you obviously made. PDFs can be generated by other means, like an export/save from Word. Secondly I provided the Google search string "IC9 trailer vin" so people could do their own searches. Different search engines will come up with different hits, but here are a few hits if you're interested:

An obviously scanned file:
Custom Built Trailers

InstaVIN Resource Center

A file that was probably not scanned but computer generated:
Country Trailers

mowermech wrote:

All problems solved with two trips to the County Courthouse!

Which might end up being two trips TOO MANY.
Call first. The State DMV or local Sheriffs office.

If it were me, and I had that trailer here in Montana, I would just go to the courthouse and get a VIN for a new home-built trailer, then go to Harbor Freight and get the 1/4 inch number/letter stamps. Stamp the new VIN on the trailer as directed by the instructions that came with the new VIN, get the stamping inspected by a Law Enforcement Officer (City Police, Sheriff deputy, Highway Patrol), take the signed paperwork to the courthouse, get the registration and license plate, and in 4 to 6 weeks I would have my new title.
All problems solved with two trips to the County Courthouse!

bob_nestor wrote:
The "IC9" portion is typed.

Look at something you didn't bother to provide a link to? No, I didn't. Many typewriters didn't have a separate glyph for the numeral "1", it was common to use a lower case "l" or, less commonly, an uppercase "I" in its stead. It may be expecting a bit much, but when the character is meant to be a one, a scanning result of ell or eye is a mis-scan.

In any case, the fact remains, no WMIs start with the letter I, and many trailer manufacturers do have WCIs which do start with 1C9, which falls in the range for USA WMIs. (NHTSA, ibid)

mike-s wrote:

bob_nestor wrote:
Interesting, but when I did a Google search with "IC9 trailer VIN" it came up with a number of scanned PDF's...

ITYM "mis-scanned."

Did you look at them? Can you explain how they're all "mis-scanned". The "IC9" portion is typed along with most of the rest of the form letter. Comparing multiple PDFs shows the typed sections all seem to scan the same way with the same information. I've scanned a lot of documents and never seen the same mistakes made consistently.

i do not have a title for my flatbed. Also it does not have a VIN tag, it just has a heavy duty stick on with the info. i do have an annual registration that goes with the license plates.

When it thaws out i really should get my stamping set out and stamp the number into the frame.

bob_nestor wrote:
Interesting, but when I did a Google search with "IC9 trailer VIN" it came up with a number of scanned PDF's...

ITYM "mis-scanned."