Waste valve cable replacement
The crimp on our Valterra kitchen water cable failed. I purchased a new cable. Our problem is getting the large nut off the failed cable assembly. Our RV has three waste water pulls. There is a co...
Forum Discussion
I got it. I have a Holiday Rambler Presidential fifth wheel.
I placed a large flat screwdriver between the frame and the nut. Then using a vise grip, I
I spun the metal end of the threaded tube. Nut broke free and from there it was an easy swap.
I used some large washers to allow the nut to sit out from the frame. Still a stupid design.
I placed a large flat screwdriver between the frame and the nut. Then using a vise grip, I
I spun the metal end of the threaded tube. Nut broke free and from there it was an easy swap.
I used some large washers to allow the nut to sit out from the frame. Still a stupid design.
