acritzer wrote:
georgelesley wrote:
Old-Biscuit wrote:
Your Shurflo 4008 has TWO adjustments. \\\
One is for pressure switch....
One is for Bypass control
Bypass allows water to return suction side during low water demands
IF you do not adjust CORRECTLY then pressure adjustment and Bypass adjustment can overlap and cause pump to NOT shut down.
HERE is an off-the-cuff adjustment method
Ours did the same thing until this adjustment was done now runs smoothly w/o cycling.
So did you do the entire "reset" adjustment listed in the link?
Yes. Might take a few tries to get it exactly right