Weight causing tires to rub inside of trailer
When my Maverick (utv) is loaded in the garage of my toy hauler its causing the trailer to sag... naturally. But this past weekend I had a blowout and discovered it was because when going around turn...
Forum Discussion
myredracer wrote:
Another thought, have you ever weighed your TH before and after loading the utv to see where you are against the GVWR? Our KZ Spree is exactly the same length as your KZ TH. It looks like you have the same 3500 lb axles. Your GVWR is 7000 vs 6800 lbs for ours. Based on our experience with scale wt. after being all loaded up, you may not have much CCC before you load the utv in. If we were to tow with just one full tank of water, we'd be overloaded. I wonder if you've been towing overloaded for some time and didn't realize it? That might explain why the springs have lost some of their arch?
My axles are 4400# and my GVWR is 8800# I haven't weighed it yet but I don't think I'm overloading it. But weighing it is on my to do list for sure now just so I have piece of mind.
