Forum Discussion

Explorer

May 05, 2014

worlds dumbest question

I know this is going to sound like a dumb question but I have too ask. Do water pressure reducer's ever wear out to the point that they restrict the water flow to much? I was looking at it yesterday when I unhooked it from the park hydrant and I noticed that the screen is pushed it but I wouldn't think that would effect anything. I use the brass type however it doesn't have a gauge on it. I have been using it for about 7 or 8 years now and it seems like that the pressure isn't what it used to be.

Seeking Advice

13 Replies

midnightsadie
Explorer II
May 05, 2014
when a person doesn,t know the answer? there,s no dumb question. the screen could be clogged.
Community Alumni
Not applicable
May 05, 2014
They don't wear out but some do end up with blockages over time. Grit and other stuff like calcium deposits can slow down the flow; had this happen to me while wintering in Myrtle Beach.
Water-Bug
Explorer II
May 05, 2014
Anything connected to city or well water can get calcium build-up. If you don't have a water softener, your shower head would be a prime example. A simple cure is to soak the device in lime-away or vinager for several hours. Lime-away works better. Or, buy a new pressure reducer.