12 volt dc / 120 ac appliance
My dan foss 12 volt refer also switches to 120 when plugged in. So which is better. 12 volt dc or using my 2000 watt inverter and running it on AC. This model draws 5 to 6 amps DC. I have a 8 g...
Forum Discussion
I'd make two measurements
1) with a DC hall effect clamp on ammeter measure the current draw when running on DC.
2) Using the same meter Then measure the draw on the inverter 12V input when running on the inverter.
whichever is lower is the way to run it.
1) with a DC hall effect clamp on ammeter measure the current draw when running on DC.
2) Using the same meter Then measure the draw on the inverter 12V input when running on the inverter.
whichever is lower is the way to run it.
