Forum Discussion
Fleetwood99
Jun 26, 2014Explorer
Welcome to RV.net.
I would agree. sounds like weak connection somewhere. Start with the Battery Cables. I have seen battery cables that look clean but, turns out after removal the contact surfaces were not clean. Wiring brush battery post Tool is a must to do the job right.
Good Luck and please post us after you find the gemlin.
Edited added: POWER OFF EVERYTHING FIRST before working on electrical 120AC and 12DC. GENSET OFF. SHORE POWER UNPLUGGED
I would agree. sounds like weak connection somewhere. Start with the Battery Cables. I have seen battery cables that look clean but, turns out after removal the contact surfaces were not clean. Wiring brush battery post Tool is a must to do the job right.
Good Luck and please post us after you find the gemlin.
Edited added: POWER OFF EVERYTHING FIRST before working on electrical 120AC and 12DC. GENSET OFF. SHORE POWER UNPLUGGED
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,370 PostsLatest Activity: Mar 18, 2026