12 volt questions, how much is good?
LED burned up last night. Stunk pretty good. I get 13.1 volts when checking the voltage where a LED connects into a 921 bulb base. Question 1 Is 13.1 a good number? Question 2 If...
Forum Discussion
I have replaced my incandescent lights (1141) with unregulated LEDs and have not had any LEDs burn up. I have had some LEDs fail, my failure analysis indicated the problem was with the panel circuit board, not the LEDs.
I use a PD9260 converter that delivers up to 14.4v. 13.1v should not give you a problem.
I use a PD9260 converter that delivers up to 14.4v. 13.1v should not give you a problem.
