12V circuit breaker
My slide out has stopped working and I can hear the breaker tripping. My toggle switch was stuck on the 'IN' position, unbeknownst to me so the breaker had been tripping ever few seconds for about thr...
Forum Discussion
I found out why the switch was sticking. The housing the switch sits in was too snug making the switch bind. When I took it out it would not stick at all. Put it back in and it sticks again so I made the opening slightly bigger and replaced the switch, tried it and repeated that three times before it worked freely multiple times. I think this has been an issue since it was new as this is at least the third unit put on this MH according to the numbers on the motors. I really hope this is the source of my headache.
