12v from 24v Battery Bank ?
With two 12vs in series and the 24v charger on the other two posts, can you draw 12v at the same time as they are being charged at 24v, from the pos and neg of just one of the batts? If so, will th...
Forum Discussion
So if I charged all day with solar at 24 and the batts in series at 24, but had the rig on one of the batts at 12, then I would need to put the batts in parallel (say after supper till after breakfast--solar disconnected) so they would even up?
I could also swap which batt is being drawn upon at some half way point during the day.
( I am dreaming up an emergency scenario where I have to use my 230w 24v panel with my 12/24 PWM solar controller. That would need the batts at 24v to do a recharge, but I still want some 12v for the rig during the day. )
I could also swap which batt is being drawn upon at some half way point during the day.
( I am dreaming up an emergency scenario where I have to use my 230w 24v panel with my 12/24 PWM solar controller. That would need the batts at 24v to do a recharge, but I still want some 12v for the rig during the day. )
