2- 6 volts batteries

If your air compressor has alligator clips you attach pos to pos of one batt and neg to neg of other battery. You made a 12v battery bank by putting twin 6v into series.

larry barnhart wrote:
Never had or wanted 2 6 volt batteries but now we have this setup.

I have a viair 12 volt air compressor. My question is how to connect the clips to use the compressor, I am thinking a red to one battery and a black to the other???? chevman 2021 Jayco white hawk TT

YEP....
That way you get 12VDC and draw is from both 6Vs

Thanks I guess I had it correct but nice to have others information.

chevman

Connect same as the main RV power cables.

FLY 4 FUN wrote:
If your air compressor has alligator clips you attach pos to pos of one batt and neg to neg of other battery. You made a 12v battery bank by putting twin 6v into series.

This could work or might not depending on which posts you connect to.

Basic setup:
- The ground (negative) cable from the rig will attach to battery 1 Negative post.
- Battery 1 positive will connect to Battery 2 negative.
- Battery 2 positive will connect to the positive cable to the rig.

You connect posts that have the cables coming from the rig. If in doubt, put a multimeter on the posts to find which combination has 12 volts.

Simply put I will draw an ASCII picture

-{6v}+~-{6V}+12 volts

so your black lead to the - on the left in this drawing
the Red to the +12

(The "~" sign in the drawing is a jumper wire)

That easy

And though they are indeed a pair of six volt batteries when you are lugging them outside the RV. Think of them as a SINGLE 12 volt when installed. for that is what they are..

Many questions like "Can I replace just one?" are answered if you think of them as a single battery (Can you replace just half a 12 volt battery?

See how that works

Can they be "Different" (Makes sizes ages) Woudl you want that a half and half 12 volt battery?