40 Amp draw from batteries to run Microwave?
When running my microwave on high I noticed the battery voltage dipped to 11.6 and the input side of the 2,000 Samlex inverter was only drawing 40 DC amps or so. I didnt think that 4 T105's voltage...
Forum Discussion
I recently burn't up my samlex 2000 watt pure sine wave inverter using a 1500 watt 1.5 quart water kettle. I have 4ea full river 250 ah 6 volt agm batteries wired for a 12 volt system. It was pulling 145 amps.
I replaced it with a 3000 watt inverter/charger and wired my batteries for a 24 volt system. It was 95 degrees ambient temperature outside when I done this so that didn't help since the samlex 2000 is only rated for about 120 degrees.
I replaced it with a 3000 watt inverter/charger and wired my batteries for a 24 volt system. It was 95 degrees ambient temperature outside when I done this so that didn't help since the samlex 2000 is only rated for about 120 degrees.
