5th Landing Gear Failure
2016 Keystone Hideout 5th wheel Today I slightly over ran my landing gear and one of the bolts on the square tubular shaft that transfers power to the passenger side (opposite the motor) sheared of...
Forum Discussion
Old-Biscuit wrote:
Stop overdriving legs. Make a red paint mark 1' prior to reaching FULL extension on driven leg. When you see RED/STOP
Thanks.... yeah, I know - I have my legs marked at the top but was at the bottom - not that it's really any different. I just looked away today for a split second. My RV pad slopes down sharply at the back so when I unhook I have to drop the nose all the way down. I use ALL of the range of motion of the jacks to get it level when parked. It also drops the cap down behind my gate to keep the HOA police off my rear end :)
One thing that has me a bit confused is the gear box is somewhat loose. I was thinking something didn't get tightened at the factory (like everything else in this thing :)) but took it apart and can see the braces off the back that prevent it from rotating. Can anyone confirm that the gear box is a bit loose when properly attached?
