8531 /Burner Issue UPDATE--Photos ( Fixed!)
With the furnace running, where do you put the pos and neg leads of the meter? Or can you do it at the Tstat inside with the furnace on? I want the 12v to the board, not the voltages the board puts...
Forum Discussion
Item to the right is a time delay relay.
That is too much voltage drop to the time delay relay. It could have burnt contacts. There is two connections. One input power, should be the 11+ volts, output to motor should be the same.
Does the motor spin freely?
That is too much voltage drop to the time delay relay. It could have burnt contacts. There is two connections. One input power, should be the 11+ volts, output to motor should be the same.
Does the motor spin freely?
