8531 /Burner Issue UPDATE--Photos ( Fixed!)
With the furnace running, where do you put the pos and neg leads of the meter? Or can you do it at the Tstat inside with the furnace on? I want the 12v to the board, not the voltages the board puts...
Forum Discussion
enblethen wrote:
I would clean the mounting plate of the rust. Make sure it has good ground contact.
Is the "mounting plate" the part that has the three prongs and has the white stuff between it and the other metal part? Do I scrape off the white backing stuff and try for metal to metal?
I could shim that so the prongs are tilted down more to the screen if that would help
EDIT-- looks like a papery sort of gasket--maybe it is supposed to be there and I better not scrape it off?
Here it is --no gasket? I will try for the other part to see if it has it.
https://www.amazon.com/Atwood-36998-Hydro-Furnace-Electrode/dp/B00CLSWK2U/ref=sr_1_10?dchild=1&keywords=Hydro+Flame+8531-II+furnace+burner+assembly&qid=1634592763&sr=8-10
