8531 /Burner Issue UPDATE--Photos ( Fixed!)
With the furnace running, where do you put the pos and neg leads of the meter? Or can you do it at the Tstat inside with the furnace on? I want the 12v to the board, not the voltages the board puts...
Forum Discussion
From earlier post:
Battery voltage start- 12.59
Battery voltage furnace running- 12.50
Voltage at furnace CB- 11.34
Voltage at thing to the right-10.93
I would try to find from the Circuit breaker 11.34 to the Time delay relay 10.93 voltage drop.
Battery voltage start- 12.59
Battery voltage furnace running- 12.50
Voltage at furnace CB- 11.34
Voltage at thing to the right-10.93
I would try to find from the Circuit breaker 11.34 to the Time delay relay 10.93 voltage drop.
