GaryS1953 wrote:
2oldman wrote:
mbopp wrote:
Check the specs, but you may exceed the allowable input voltage on your controller.
True.. most Renogy controllers are good to 100vdc.
OK, from my Renogy manual "Maximum Solar Input 12V@520W | 24V@1040W". I guess that means I can't wire another in series?
Wrong specification.
You need to add the Voc of the three panels and compare to Vmax on the Renogy.
You have the manual right?
If you want to put all three in parallel the Renogy will probably just clip power at the Imax rating.
(Imax is not a movie theater here)