Adding a portable panel to roof mounted panel
I have a 160w Go Power panel (specs below) on the roof of my toyhauler fed to a Blue Sky Sun Charger 30 PWM CC. 208ah battery bank (two Interstate GC2 in series). Built in Onan 4000W generator. No ...
Forum Discussion
BFL13 wrote:
Yank your solar controller from where it is, and splice the array and battery wires together there. Now go to the battery bank and find the solar wires that go onto the battery bank.
Now insert your original controller by using the previous battery wires as the array side new wires to the controller and by adding new wires to be the controller -to- battery wires. Ta Da !
Translation: relocate controller closer to batteries :)...
I would also replace the controller with a model that allows remote display.
