Adding an inverter off the Distribution block
So, After looking I have a TON of space under my converter/charger on my passport 2920BH. After looking at the 12v distrobution chart for the fuses it looked like I had quite a few open blocks to ...
Forum Discussion
Inverters usually get connected very close to the battery with fat wire.
Your inverter is capable of pulling 600/12= 50a, which is a lot for a 12v panel. (I don't think those are 51w fuses...lol) With surging for motors, could go higher than that.
What are you running with the inverter?
Your inverter is capable of pulling 600/12= 50a, which is a lot for a 12v panel. (I don't think those are 51w fuses...lol) With surging for motors, could go higher than that.
What are you running with the inverter?
