Advice needed on delamination repair
One sidewall of the cabover of my Class-C had a lot of delamination. The previous owner had apparently replaced the Filon and luan in this area before, so I just took off the edge molding and pried of...
Forum Discussion
Here's a picture of one that I was working on.
That's just a scrap piece of plywood with white paint on it that the clamps are pushing on. You have to have the pressure on the filon to keep the polyurethane from expanding.
Hope that makes more sense.
That's just a scrap piece of plywood with white paint on it that the clamps are pushing on. You have to have the pressure on the filon to keep the polyurethane from expanding.
Hope that makes more sense.
