I bought most of my LEDs on eBay from
this vender. I did have some early failures and determined that the failures were not the LEDs but were the solder connections on the circuit board in the panel light. The failures were one row of 3 LEDs and was a hardly noticeable loss of light. These failures were with my Magnetek converter that is single stage, staying at 13.8v. I have since changed to a PC9260 converter, 4 stage, that gets up to 14.4v, and have had no new failures.
I like the 36-1210 panels, warm white, and I also have some of the 18-5050 cob lights, also warm white.
I advise anyone to buy a couple and try them before ordering many.
