AGM vs Flooded Bulk Times
PT keeps asking whether AGMs will spend more time in Bulk at the same charging rate. I found a good example where that can be measured, using ah64id's test with his PD4655 on his pair of Lifeline...
Forum Discussion
OK geniuses :)
Impedence is used to measure battery internal resistance because DC signal is not used as a reference point.
The lower the impedence the lower the resistance and Ohms law is inarguable unless one likes armless jackets that zip up the back.
Soooooooooooooooooooooooooo.........
The only presentable arguement not worthy of a rhino dart is the one that asks....
Are you ready?
You sure?
At what percentage of charge will different construction present impedence greater than the potential of E voltage?
Example: will battery A refuse less than max charge voltage potential at 67% SOC while battery B continues to 77%?
This has more possible permutations than calculating the point of detonation of nitroglycerin in a paint shaker. Temperatures Density of electroyte, grid and paste composition, value of applied E, limitation of applied I.
Took me awhile to wrap my mind around the Funhouse parameters of this one.
Which direction does the earth orbit around the sun? Degree of ellipse? Affect of 3% solar output variances at apogee and perigee? Abbreviate to (2) paragraphs ease. :)
Impedence is used to measure battery internal resistance because DC signal is not used as a reference point.
The lower the impedence the lower the resistance and Ohms law is inarguable unless one likes armless jackets that zip up the back.
Soooooooooooooooooooooooooo.........
The only presentable arguement not worthy of a rhino dart is the one that asks....
Are you ready?
You sure?
At what percentage of charge will different construction present impedence greater than the potential of E voltage?
Example: will battery A refuse less than max charge voltage potential at 67% SOC while battery B continues to 77%?
This has more possible permutations than calculating the point of detonation of nitroglycerin in a paint shaker. Temperatures Density of electroyte, grid and paste composition, value of applied E, limitation of applied I.
Took me awhile to wrap my mind around the Funhouse parameters of this one.
Which direction does the earth orbit around the sun? Degree of ellipse? Affect of 3% solar output variances at apogee and perigee? Abbreviate to (2) paragraphs ease. :)
