Allison HD 4060 Trans Code?
Ok..so I asked this on another forum but figured knowledge is a good place to start with this. My Allison has started to act up with a Tran's Code of (D-1) 00-35, which translates to a "power interr...
Forum Discussion
OK so I disconnected the wiring harness's to the Power Relays, pulled all the relays, sprayed them with Contact cleaner as well as both male and female connections. I also pulled the Key Pad and sprayed that too. As of right now, before a Test drive, it is NOT doing or having the issue it was on starting the MH. No more funny lines on display, no more blinking/buzzer of DO Not Shift. Hopefully tomorrow I'll get it out and do some driving...forward and reverse.
