Attwood gc10a-3e
Attwood gc10a-3e Have intermittent starting on gas, works fine on electric side. I have cleaned all the terminals and applied some dielectric grease to them. It seems if it is continuous use it work...
Forum Discussion
azbohunter wrote:BFL13 wrote:
Intermittent start on gas is a sign that the gas side needs a clean, not the electric contacts. Sand-paper the ends of the igniter probes (all three) and use mineral spirits to clean (soak in a jar or can) the sprayer. The sprayer will shoot mineral spirits like a little water pistol when it is clean.
I have cleaned the probes and the grounds, not sure what you are referring to as "sprayer""? Orifice maybe???
Yes, orifice. Leave tube on the intake and fill with mineral spirits and blow --should squirt out.
