Atwood 7900 series furnace troubleshooting
I have a brand new 7916-II installed in my small coach. Thermostat is brand new, t-stat wiring is brand new. The furnace gets most of the way through the ignition cycle before failing. 1. T-sta...
Forum Discussion
Spark electrode not properly positioned....
Needs to be directly over the burner slots and the gap needs to be 1/8" (tip to rod).
Also burner slots need to be clear of any rust/debris etc. that would disrupt gas flow.
Needs to be directly over the burner slots and the gap needs to be 1/8" (tip to rod).
Also burner slots need to be clear of any rust/debris etc. that would disrupt gas flow.
