Atwood Furnace Problems
I have a problem with the Atwood furnace on my 5th wheel (2019 Montana High Country ) It's an intermittent fault, usually happening about once every week. In the middle of the night, usually aroun...
Forum Discussion
A1RVTraveler wrote:
The problem is with the sail switch bracket. Dometic/Atwood realized they have a problem and redesigned the sail switch and bracket assembly. The new bracket allows the sail switch to travel 1/16-inch farther.
What you currently see is intermittent sail switch operation. The fan motor starts but the circuit board is not getting a signal from the sail switch that it is closed.
The new part number is 33082. You need to change the sail switch AND the bracket. It is covered by warranty if you are in the 2-year warranty period.
Matt
THIS^^^^^^^^^^^^^
Sail Switch is not closing allowing DC to go to circuit board for igniton sequence
resetting On/Off switch allows circuit board to be reset ---clears the lockout condition
