Atwood Stove Burner Loose
The main, or front, burner is listing to starboard. It's loose and won't stay put when I level it. It is connected to the thin wire to the side/rear and the metal piece that runs toward the burner con...
Forum Discussion
The link icon isn't opening, but there is a diagram here:
http://www.atwoodmobile.com/manuals/cooking/RangePartsList.pdf
Model 34 shown on Pg. 3, shows Part 5b, the L-bracket I was referring to.
I removed the burner and found that the bracket is affixed on the burner end with one small screw which is gone. The other end is held down with a larger screw. I'll unscrew the bracket from the stove, screw it to the underside of the burner and screw the bracket back down to the base. I have the model number (RV2135BBPR)and will make a trip to the RV store Atwood shows as a dealer to get the right screw.
Thanks for the advice. I'm not good at this stuff and like to get some advice before pulling things apart.
http://www.atwoodmobile.com/manuals/cooking/RangePartsList.pdf
Model 34 shown on Pg. 3, shows Part 5b, the L-bracket I was referring to.
I removed the burner and found that the bracket is affixed on the burner end with one small screw which is gone. The other end is held down with a larger screw. I'll unscrew the bracket from the stove, screw it to the underside of the burner and screw the bracket back down to the base. I have the model number (RV2135BBPR)and will make a trip to the RV store Atwood shows as a dealer to get the right screw.
Thanks for the advice. I'm not good at this stuff and like to get some advice before pulling things apart.
