Atwood thermal cut-off issue
This one has me baffled. I had a spider web nest in the LP blow through tube causing a block. The thermal cut-off link blew as it should. I cleared the obstruction and removed the thermal cut-off (...
Forum Discussion
Problem solved...
I replaced the Spark Electrode. No more blown fuses.
The old Electrode must have been drawing just enough current to blow the fuse with the Thermal Cut-off in but not when the jumper was in. Weird...
BTW dougrainer, you forgot one thing; using a jumper did not cause the fuse to blow. So if there was a short somewhere the jumper would have blown the fuse as well. Thanks for replying...
I replaced the Spark Electrode. No more blown fuses.
The old Electrode must have been drawing just enough current to blow the fuse with the Thermal Cut-off in but not when the jumper was in. Weird...
BTW dougrainer, you forgot one thing; using a jumper did not cause the fuse to blow. So if there was a short somewhere the jumper would have blown the fuse as well. Thanks for replying...
