Awning switch wiring - Weather Pro
I have a A&E Weather pro on a 2005 Southwind. I removed the controller box because it was cr-- . Now I have no power to the main roller switch. There were three wires going from the box to the roller ...
Forum Discussion
Why not replace the control box? There are 2 wire harness's from the controller for the Main awning. The 3 wire goes to the switch and THAT switch feeds the control box to tell the control box to reverse the 2 motor wire polarity. The 2nd wire harness is the Black and Red 2 wire that goes to the awning motor. Doug
