Awning
I have a problem, my awning just pop out about 3"in the middle of the aluminium C channel which is 17 ft long, it looks like a half loop best way I can describe it. The Fabric and vinyl rope are still...
Forum Discussion
You really only have two options. where the 3 inch piece is out you could try to bend the "C" channel open a little more then use a plastic putty knife and force the rope back into the channel. After the rope is back in the channel you then would bend the "C" channel closed again. The other option is to take the screws out of the end of the rope at each end of the channel then pull the awning out one end of the channel until you get past the part that is out then reinstall.
