balanced battery cables
It seems obvious but is it? We have 4 6V GSs in series-parallel with the two 12V pairs connected as in the diagram below. (Which I unashamedly copied from one of Painotuna's posts.) However, bo...
Forum Discussion
Canadian Rainbirds wrote:Its still a Winnebago product with the same floor layout. At the base of my bed, there is a boxed area about 10" deep that is all cable routing, the EMS, breaker panels, and the ram for the slides have more than enough room to mount the surge protector as well as DC distribution, including the Shunt for the Magnum, takes up zero storage space. I have a friend with a little newer 32T Journey and pretty sure that access box is in his too.SCVJeff wrote:
Looks like a Winne bay. Have you considered looking for another place you can build a DC hub and lose all those wires on the battery?
Between the house feed, solar charger, Magnum Inverter/Charger, external sense, temp sense, and the watering system, it just got too cluttered. Now there is the watering manifold, temp sense, and 2ea. 4/0. All else is in a cable raceway
Not a Winne, but close; 32' Itasca Horizon. Being only 32' there is not really anywhere else to put them. We spend a lot of time in the rig and carry too much stuff!
