Balancing loads on each leg of 50 amp service
As I was working on my generator ( another story on a different thread), I came across the reality that both of my ACs were on the same leg of my 50 amp service. It has been that way from the factory...
Forum Discussion
Thanks. I got out the original wiring diagram for the trailer last night (Alpenlite is good about thorough construction documentation) and sure enough the circuit breakers are shown to be the way I now have them with the second AC on the second leg. From the factory they switched places with the electric element of the hot water heater. So now it’s the way it was originally designed. It’s been like that for fifteen years! The only way it would show up as a problem was if I ran both ACs off the generator.
