Batt charging Q - PD9245; and adding solar
Greetings; I am trying to get my little Rialta up to speed for full-timing. And need advice/help on charging my batteries and adding solar. I have 2 27 group walmart marine/deep batteries - abo...
Forum Discussion
OK - let's see if I can do 2 in a row from google
To rjfishin - I assumed it started out at low amps cuz the batteries were still at 70% or better. Is there a way to determine (a service center I can take it to) if the PD is working properly?? Still my Trimetric does not think the batteries are "full" - but then not sure the default P1 value of 14.3 is what I should use. It (in part) determines "full" status. Still, I'll watch the volts to decide when to recharge. Thanks
Kelly
To rjfishin - I assumed it started out at low amps cuz the batteries were still at 70% or better. Is there a way to determine (a service center I can take it to) if the PD is working properly?? Still my Trimetric does not think the batteries are "full" - but then not sure the default P1 value of 14.3 is what I should use. It (in part) determines "full" status. Still, I'll watch the volts to decide when to recharge. Thanks
Kelly
