Battery cut off
We just bought a 2013 Montana with a battery cut off switch or in this case a plastic key that you turn to off when you don't want the battery to get a draw. My question is should this also disable th...
Forum Discussion
Surprised nobody has suggested following the wires. There should be only one wire from the switch to the positive battery post. Everything, one way or another, should be connected to something on the trailer side of the switch. Preferably the switch cable goes to a positive bus bar somewhere which everything gets its power from.
Also ideally there should be a negative bus bar somewhere which in turn is grounded to the trailer frame, sometimes at the same point as the battery negative cable.
Also ideally there should be a negative bus bar somewhere which in turn is grounded to the trailer frame, sometimes at the same point as the battery negative cable.
